 |
| Bergey 10KW |
|
We are certified as Retailers and Installers and very familiar with the line of Bergey Wind System Turbines. These are medium demand low maintenance systems. Usually installed for residential and site specific agricultural applications. We have a good number of these systems installed and operational. If you would like to see one of these up close, please call our office for a tour of an install. Systems usually start around $70,000.00 installed. Click here for more information
|
JBS Wind and BergeyThe Bergey Wind Corporation EXCEL is a modern 6.7 meter (22 ft) diameter, 10KW wind turbine designed for high reliability, low maintenance, and automatic operation in adverse weather conditions. It is available in two configurations: the grid-connected (the Excel) and a battery charging (the Excel R) unit. The BWC turbines are ruggedly built. Bergey was the first to offer a five year Warranty in the industry.
The battery charging BWC EXCEL's can be supplied with outputs of 24, 48, 120 or 240 VDC. They are well suited for large rural homes, remote villages and facilities, eco-tourism resorts, and larger telecommunications sites.
Connected to the grid, the BWC EXCEL can provide most of the electricity for an average total electric home at moderate wind sites. The all new GridTek 10 power processor (inverter) is one of the most advanced in the industry and it carries a full 1741 UL certification which complies to the latest utility standards.
|
Specs for the Excel Series from BWC
Start-up Wind Speed: 3.4 m/s (7.5 mph)
Cut-in Wind Speed: 3.1 m/s (7 mph)
Rated Wind Speed: 13.8 m/s (31 mph)
Rated Power: 10 kW for grid intertie, 7.5 kW for battery-charging
Cut-Out Wind Speed: None
Furling Wind Speed: 15.6 m/s (35 mph)
Max. Design Wind Speed: 54 m/s (120 mph)
 Excel R Battery Manual
Excel grid connected Specification sheet, front page
Excel grid connected Specification sheet, back page
Type: 3 Blade Upwind
Rotor Diameter: 6.7 m (22 ft.)
Blade Pitch Control: None, Fixed Pitch
Overspeed Protection: Autofurl
Gearbox: None, Direct Drive
Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F)
Generator: Permanent Magnet Alternator
Output Form: 3 Phase AC, Variable Frequency (Regulated 48 - 240 VDC after VCS-10 or 240 VAC, 1Ø, 60 Hz or 220 VAC, 1Ø, 50 Hz with GridTek® inverter). |
|
|